Hachiroku.net | Forums
Go Back   Hachiroku.net | Forums > Main Category > Tech and Performance
Reload this Page megasquirt edis with COP?
Reply
 
Thread Tools Display Modes
  (#11) Old
toyotaspeed90
 
Default 04-03-2012, 10:30 AM

Quote:
Originally Posted by 82te72 View Post
Toyotaspeed90. I do see how that could just to control ground, that does make sense,

this is how all coils work.....
  Send a message via AIM to toyotaspeed90 Send a message via MSN to toyotaspeed90 Send a message via Yahoo to toyotaspeed90  
Reply With Quote
  (#12) Old
82te72
 
82te72's Avatar
 
Default 04-03-2012, 01:14 PM

thangs for the info, and paseo coilpacks look better i believe than standard coilpacks. heres a picture for example

however if i find some COP's that fit easily ill see what i can do with those and make an attempt to wire them up.
   
Reply With Quote
  (#13) Old
shawkins
 
Default 04-10-2012, 09:25 AM

Quote:
Originally Posted by 82te72 View Post
thangs for the info, and paseo coilpacks look better i believe than standard coilpacks. heres a picture for example

however if i find some COP's that fit easily ill see what i can do with those and make an attempt to wire them up.
Looks to be the same coilpacks as on the 5VZ-FE in the Tacomas and 4Runners.
   
Reply With Quote
  (#14) Old
decepcionez
 
Default 04-14-2012, 02:44 PM

I don't know if it helps but I used 96 Lexus coils on my set up its a 2 wire coil as well, I used 2 Edis packs with megajolt here
   
Reply With Quote
  (#15) Old
82te72
 
82te72's Avatar
 
Default 04-14-2012, 05:53 PM

yeah that does help. what do you mean 2 Edis packs? 2 of the modules? how did you wire it up?
   
Reply With Quote
  (#16) Old
decepcionez
 
Default 04-14-2012, 07:05 PM

Yes 2 modules, I used one for 1 and 3 coils and another one for 2 and 4 since each module only fires 2 coils, as far as wiring I used the exact diagram as Jonas(dr occa) on club4ag ill look for it tonite and post it on here for you or The best thing you could do is ask him directly, I think he is one of the best when it comes to dealing with this

Last edited by decepcionez; 04-14-2012 at 11:58 PM.
   
Reply With Quote
  (#17) Old
decepcionez
 
Default 04-14-2012, 07:11 PM

Here
   
Reply With Quote
  (#18) Old
decepcionez
 
Default 04-14-2012, 07:15 PM

   
Reply With Quote
  (#19) Old
82te72
 
82te72's Avatar
 
Default 04-15-2012, 10:12 AM

thanks for the info. i dont think your link worked but i searched and found this diagram that he had posted on C4ag



*added to my worklog to look back upon for info*

what isnt shown in his schematic is the 25 μF condenser, i'm assuming that was used in your set up as well?
   
Reply With Quote
  (#20) Old
decepcionez
 
Default 04-15-2012, 01:05 PM

Yes, he is on this forum as well, he would be your best option on this
   
Reply With Quote
Reply

Thread Tools
Display Modes




Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
vBulletin Skin developed by: vBStyles.com