[shadowless_nite]

well ive finally decided its time to seriously look for a place to repair my 4ke head. with progress moving along on the block ive been feeling the need to finally get my head done and taken care of.

a little back story.... i had the head worked on and well things went sour and i was lucky to even get it back. the tard did all the work on the head with out checking it over before doing anything he ported it out then decided to check it over only to find a crack in the cylinder head. The crack starts on the head surface and seems to continue under the valve seat for what looks to be like 1/2" and I do not know if it cracked completely through to the water jacket. lets just say i took a huge hit on this deal and many people got screwed over by this guy...

http://www.kp61.net/forum/showthread.php?t=6593

Im hoping someone in the local portland area can fix this head, i know i know if could have bought a 20v and had gobs more power but thats not the point. I simply want this head to get fixed and fixed right if possible. Sooo...... anyone have any idea of a reputable place to get this done??? my tax return is just around the corner

[oldeskewltoy]

If you'd like............ I'll ask Loynings if they know of anyone.........

[shadowless_nite]

Originally Posted by oldeskewltoy

If you'd like............ I'll ask Loynings if they know of anyone.........

if you could that would be great dan, at this point i need reliable recommendations and if someone at loynings recommends someone i would probably trust it. lmk

[ObieWan]

c's machine in hazel dell seems to do a good job and there pretty cool guys i have taken dozens of heads to them.

[shadowless_nite]

Originally Posted by ObieWan

c's machine in hazel dell seems to do a good job and there pretty cool guys i have taken dozens of heads to them.

i normally take all my stuff there but they said they wouldnt be capable of fixing the crack.