[Will]

Originally Posted by Electric Space

cursed the legendary GM 350 to hell. Have hate atm. Whoever said these are 'cheap' can kiss my rump.

whatcha need?

[Electric Space]

whole 2/4 bolt main block, no heads or intake. L89 or late 70s, early 80s (before TBI).

Must revive the carlo! Thought the 2 busted pistons were only problem.....ehhh every bearing is spun! Amazing what water and oil mix can do in 2 minutes of running time!

Picked up a great TBI+Th350 from 3500 vandura, but need a diff fly+clutch to fit.

[yo_mj]

Originally Posted by 1234

rebuilt shifter on wife's AW11

Before


After

Just an advice, use tape to hold the bolts, tape the threaded part so that some excess tape is what's holding it from slipping through. It seems more logical than zip ties.

[1234]

Originally Posted by yo_mj

Just an advice, use tape to hold the bolts, tape the threaded part so that some excess tape is what's holding it from slipping through. It seems more logical than zip ties.

true..painters tape is cheaper then zip ties..

mounts welded in... motor is in..

[Debo]

Started mounting the box for the sub..

[LongGrain]

fresh ngk iridiums in the 14.

[Young_02]

Removed the wind shield trim.
Anyone know how to cut out and re-glue a wind shield?

[white_raven]

I bought another one.

[yosan]

Found a leak between engine and transmission at the Salem WMC and it got worse when I got home. Hour and half later, took out the tranny and found the rear main in perfect condition(6 yrs)...I never knew the input shaft tranmissin had a seal and now will b waiting for many of new parts...

[dac_0305]

Painted all my interior trim